All posts by imreal

Caswell Cooke Jr’s newly released “The Death And Resurrection of the Episcopal Church” tackles the decline of faith and a need for its resurgence in modern times


News Image

“The Death And Resurrection of the Episcopal Church: How To Save A Church In Decline”: a compelling discussion on solutions to usher in the revival of the Episcopal Church amid controversies and descent of faith. “The Death And Resurrection of the Episcopal Church: How To Save A Church In Decline” is the creation of published author Caswell Cooke Jr, an elected member of the Westerly, RI, town council, and a radio and TV host.

Cooke shares, “In an era where churches in America are in decline, this book offers a clear path and hope for the future. Using the Episcopal Church as an example of a Mainline Protestant Domination that has faced a half century of steep decline, the author shows where the church has gone astray, what has contributed to the continued losses, and a strong critique of the leadership, as well as a way for the people to take back their church and grow it.

“This book is a must have for anyone who truly cares about the future of American Protestant churches, especially the Lutheran, Presbyterian, Methodist and Congregational Churches, which all face the exact same fate.

“This compelling narrative tackles the modern-day issues that divide our country: conservative vs liberal, race issues, sexuality and other third rail controversies that have torn apart the church. Most importantly the book offers real solutions for how the church should deal with them so as to be a big tent for all people.

“Brutally honest, insightful and reflective, this book will be a quick read and easy to implement in your own parish. Nothing coming from the leadership of any of these denominations has worked, so if you care about the future of Mainline Protestants and especially the Episcopal Church, then this is for you!”

Published by Christian Faith Publishing, Caswell Cooke Jr’s new book inspires mental growth concerning the much-needed progress in efficiency and efficacy in contending with the struggles of the Episcopal Church.

This book presents no-holds-barred arguments that desire the renaissance of the Christian faith through the nurturing of the church in the aspect of congregational development and reform of the leadership.

View the synopsis of “The Death And Resurrection of the Episcopal Church: How To Save A Church In Decline” on YouTube.

Consumers can purchase “The Death And Resurrection of the Episcopal Church: How To Save A Church In Decline” at traditional brick-and-mortar bookstores or online at Amazon.com, Apple iTunes store, or Barnes and Noble.

For additional information or inquiries about “The Death And Resurrection of the Episcopal Church: How To Save A Church In Decline,” contact the Christian Faith Publishing media department at 866-554-0919.

Share article on social media or email:

Nautilus Labs and Danelec Marine Announce Data & IoT Integration for Predictive Decision Support


Nautilus Labs

Nautilus Labs

“We believe ‘interoperability’ will be the defining term of this decade—and that applies to organizations, as much as it does technology.”

Nautilus Labs, the technology firm advancing the efficiency of ocean commerce through artificial intelligence, and Danelec Marine, the leading maritime data transmission service and navigation systems manufacturer—today announced a new data and IoT integration for predictive analytics and decision support.

“The underlying, raw material of every decision made at sea is data,” said Leigh Jaffe, who leads partnerships at Nautilus. “But that data is only valuable when it’s freed from system silos, reliably delivered back to shore, and transformed into actionable information for teams. We believe ‘interoperability’ will be the defining term of this decade—and that applies to organizations, as much as it does technology. And in this era of open ecosystems, we’re extremely excited to join forces with forward thinking, service-oriented OEMs like Danelec—for the benefit of their clients and ours.”

Denmark-based Danelec has more than 20 years of experience with maritime data technology. The company operates globally through an extensive network of authorized service partners with 600+ certified service technicians who have installed over 6,000 proprietary systems on vessels worldwide.

One of the main barriers for widespread adoption of IoT in the maritime industry includes the complexity and high cost of implementation. Danelec Marine addresses this challenge with their “ship-2-shore” cloud-based data solution, DanelecConnect, along with their small electronic remote server (VRS) that connects with the ship’s Voyage Data Recorder (VDR) and a vast array of analog, digital or serial sensors throughout the vessel.

With Nautilus Platform, DanelecConnect commercial and technical clients will be able to directly access a user-friendly, actionable UI for historical, real-time, and predictive vessel data and analytics.

Expanding on this announcement, Casper Jensen, Danelec’s Chief Operating Officer, noted, “With our simple and reliable ship data collection and processing along with the cost reduction of ship-to-shore communications, many more ships can—and will—be IoT-enabled within the next few years. Fleet optimization is no longer just an option in today’s very competitive shipping industry; it’s the only way for ship operators to manage their vessels and succeed. We’re delighted to work with Nautilus Labs in transforming the maritime industry, together.”

DanelecConnect users can request Nautilus Platform via https://nautiluslabs.co/demo.

ABOUT DANELEC MARINE

Headquartered in Denmark, Danelec Marine is a leading supplier of Voyage Data Recorders (VDRs), ship-to-shore data communication systems and Electronic Chart Display and Information Systems (ECDIS). Danelec Marine was one of the first companies to bring to market VDRs and Simplified VDRs (S-VDRs) to meet the original IMO carriage requirements. More than 6,000 vessels today are equipped with a VDR or S-VDR designed and manufactured by Danelec Marine. The company has service facilities with factory-trained personnel in more than 50 countries and Certified Service Centers at strategic locations worldwide. To learn more about the Danelec difference, visit http://www.danelec-marine.com.

ABOUT NAUTILUS

Ocean commerce consumes over $100 billion dollars of fuel every year, nearly a third of which is the result of needless overconsumption. For owner-operators, reliance on manually collected and analyzed data makes it difficult to optimize fleet performance in real time. By providing a unified data platform that leverages machine learning, Nautilus helps clients make better decisions by maximizing the return for every vessel and voyage—and drive closer collaboration, greater transparency, and stronger accountability across their full fleets and shoreside teams, in real time. (Visit http://www.nautiluslabs.co to learn more.)

Share article on social media or email:

Navitas‘65W GaNFast charger solution chosen by Xiaomi for Mi 10 Pro


News Image

GaNFast technology has the advantages of small size, light weight and high efficiency, which makes it extremely attractive. GaNFast technology brings the industry a small, efficient charger that can quickly charge electronic products such as mobile phones and laptops

Navitas Semiconductor announced together with XIAOMI Group today that its GaNFast charging technology had been adopted by Xiaomi for the flagship Mi 10 PRO smartphone. The announcement was made at the Xiaomi Online Live Press Conference on February 13th, by Xiaomi Chairman and CEO Mr. Jun LEI. GaNFast power ICs use gallium nitride (GaN), a new semiconductor material which can operate up to 100x faster than earlier silicon (Si) power chips, so take only 45 minutes to charge the Mi 10 PRO from 0 to 100%.

“GaN (gallium nitride), as a new semiconductor material has brought unimaginable effects to the charger,” said Mr. Jun LEI, continuing, “It enables the charger to become extremely small and the charging efficiency extremely high. The 65W GaN charger is only half the size of the 65W traditional charger that comes as standard with our Xiaomi 10 PRO.” Mr. Jun LEI encouraged consumers and Mi fans to pay attention to gallium nitride technology and changes in charging technology in the new era.

https://www.ganfast.com/xiaomi-65w-launch/

Xiaomi invested earlier in Navitas Semiconductor to lay the groundwork for this cooperation. Xiaomi’s strategy is to establish upstream and downstream partnerships in the industry chain through capital investment, while taking into account the dual benefits of investment and business. Through this cooperation, Navitas Semiconductor has also been able to broaden its sales channels. This is evidence of Xiaomi’s support for cooperative enterprises, promoting manufacturing upgrades, and driving innovation, culminating in the release of the Xiaomi Mi 10 PRO with GaNFast charging.

Gene SHERIDAN, CEO of Navitas Semiconductor, said, “I am very pleased to see Xiaomi’s open attitude towards new materials and new technologies. From the start, Navitas has focused on the technology application and innovation of GaN materials. GaNFast power ICs are monolithic integration of FET, drive and logic and achieve extremely small application size and high efficiency. For manufacturers who want to lead with technology, GaNFast enables high performance and drives product differentiation!”

Yingjie ZHA, general manager of Navitas Semiconductor China, said, “The battery capacity of smartphones, tablets and laptops increasing, while consumers are eager to have a faster-charging experience. GaNFast technology has the advantages of small size, light weight and high efficiency, which makes it extremely attractive. GaNFast technology brings the industry a small, efficient charger that can quickly charge electronic products such as mobile phones and laptops.”

Xiaomi’s 65W GaN charger uses Navitas’ NV6115 and NV6117 GaNFast power ICs which are optimized for high-frequency, soft-switching topologies. Monolithic integration of FETs, drivers and logic delivers a very small, very fast, easy-to-use “digital-in, power-out” high-performance power conversion module. Using GaNFast, Xiaomi’s 65W GaN charger is only 56.3 x 30.8 x 30.8 mm (53 cc) which is half the size of standard adapters.

About XIAOMI:

Always believe that good things are about to happen.

Xiaomi was formally established in April 2010. It is an Internet company with mobile phones, smart hardware and IoT platforms as its core. Just 7 years after starting the business, Xiaomi’s annual revenue has exceeded 100 billion yuan. As of 2018, Xiaomi’s business has covered more than 80 countries and regions around the world. Xiaomi’s mission is to always insist on making good products that are “amazing with honest prices” so that everyone in the world can enjoy the beautiful life brought by technology.

About Navitas:

Navitas Semiconductor Inc.
is the world’s first and only GaN Power IC company, founded in 2014 and based in El Segundo, CA, USA. Navitas has a strong and growing team of power semiconductor industry experts with a combined 200 years of experience in materials, devices, applications, systems and marketing, plus a proven record of innovation with over 200 patents among its founders. GaN power ICs monolithically integrate power, analog and logic circuits to enable faster charging, higher power density and greater energy savings for mobile, consumer, enterprise, eMobility and new energy markets.

Navitas Semiconductor, GaNFast and the Navitas logo are trademarks or registered trademarks of Navitas Semiconductor, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Share article on social media or email:

AutismOne Speaker Unveils Shocking Cost of Autism in New Study


…if prevalence continues to increase at the past rate, the cost for the U.S. will grow to nearly $15 trillion.

AutismOne announced that AutismOne 2020 Conference speaker Dr. Janet Cakir will reveal the staggering costs of autism as shown in a new study.

Autism is associated with approximately $3.6 million in lifetime social costs arising from additional health, education, and care needs and lowered or absent earnings. Diagnoses between 1990 and 2019 in the U.S. are associated with $7 trillion in lifetime social costs. By 2029, if prevalence remains the same, the cost will grow to $11.5 trillion, and if prevalence continues to increase at the past rate, the cost for the U.S. will grow to nearly $15 trillion.

Said Dr. Cakir, “It’s an honor to present this work at AutismOne!” Dr. Cakir said this study will be presented in a conference setting for the first time at the AutismOne 2020 Conference.

The AutismOne 2020 Conference will be held at the beautiful Loews Chicago O’Hare Hotel, which is just ten minutes from Chicago O’Hare International Airport. The conference will be held Wednesday, May 20 through Sunday, May 24.

Dr. Cakir’s presentation will be held on Saturday, May 23.

For more information or to register, please visit http://www.autismoneconference.com.

Share article on social media or email:

Biomechanical Analysis of Inspan Spinous Process Fixation Alone in The Lumbar Spine Demonstrates Positive Results


Inspan ScrewLES Fusion

INSPAN LLC (a privately-owned company) is pleased to announce the positive results from a biomechanical analysis of spinous process fixation alone or with facet screws in the lumbar spine using the Inspan interspinous fixation device (INSPAN LLC). Unlike extension block design, the Inspan device fixates the spine to allow for immediate stability, distraction, decompression, and fusion. Biomechanical assessments of interspinous process fixation have demonstrated particularly advantageous outcomes in stabilizing the sagittal plane for during flexion and extension. Biomechanical studies of the Inspan device suggest it may be the strongest interspinous fixation device on the market and thus is being used for spinal fusion replacing the traditional method that uses pedicle screws and interbodies with laminectomies.

The study was performed at the LESS Institute by Professor Dr. Kingsley R Chin, MD, a board-certified orthopedic spine surgeon and coauthors Dr. Fabio Pencle and Dr. Jason Seale.

Human cadaveric spines were biomechanically tested under the following conditions: 1) intact/control; 2) Inspan only, 3) Inspan with facet screws (FS), 4) Inspan with lateral interbody fixation (LIF), 5) Inspan with LIF and FS. Each test consisted of 100 N of axial preload with ± 7.5 Nm of torque in flexion/extension (FE), right/left lateral bending (LB), and right/left axial rotation (AR).

The study showed a decrease in flexion-extension, lateral bending and axial bending in all conditions compared to intact control. Adding facet screws does not improve stability during flexion/extension (already best loading mode for spine process plating). With LIF, each point of fixation added (FS or Inspan) incrementally improves stability by about the same amount during lateral bending and axial rotation.

In conclusion, Inspan proved effective biomechanically in increasing foraminal height and restricting flexion/extension motion. Other effects without LIF, Inspan is moderately effective in restricting axial rotation or lateral bending. With the LIF interbody, testing showed better stability than no LIF. The addition of Inspan to lumbar fixation increases foraminal height by 1mm minimum.

About INSPAN, LLC

INSPAN, LLC is privately owned by KICVentures and is focused on advancing the platform of patented interspinous fixation technology. The Inspan device has a proven ten-year track record with thousands implanted since FDA-clearance in 2010.

Inspan FDA Indications

The Inspan Slim Spinous Process Plate System is a posterior non-pedicle supplemental fixation system intended for use in the non-cervical spine (T1-S1). It is intended for plate fixation/attachment to the spinous process for the purpose of achieving supplemental fusion for the following indications: spondylolisthesis, trauma (fracture ordislocation), tumor, or degenerative disc disease (defined as discogenic pain with degeneration of the disc confirmed by history and radiographic studies). The device is intended for use with bone graft material and is not intended for stand-alone use.

Share article on social media or email:

Farm Credit Announces February Patronage Distribution to Members


News Image

“We are proud to be able to return our profits to our members again this month,” says Tom Truitt, CEO of MidAtlantic Farm Credit. “Our patronage program is a unique benefit of Farm Credit’s cooperative structure that sets us apart from other lenders.”

MidAtlantic Farm Credit announced an extra patronage distribution of nearly $10 million in cash to its members this month.

“We are proud to be able to return our profits to our members again this month,” says Tom Truitt, CEO of MidAtlantic Farm Credit. “Our patronage program is a unique benefit of Farm Credit’s cooperative structure that sets us apart from other lenders.”

MidAtlantic Farm Credit is a part of the national Farm Credit System. Their territory covers portions of Delaware, Maryland, Pennsylvania, Virginia, and West Virginia. Farm Credit is a member-owned cooperative, comprised of associations that are able to share a portion of their annual profits with their member-borrowers. Each association determines its total income and expenses at the close of each fiscal year. Once all expenses are deducted, the net income remaining can be distributed in accordance with the association’s bylaws.

Historically, MidAtlantic Farm Credit has returned patronage twice a year – once in April, which is determined upon the cooperative’s net income and borrower’s usage from the year prior, and again in December, which is based off of the cooperative’s net income and borrower’s usage from previous years. “This additional patronage distribution goes directly to our members, their families, and the communities we serve,” adds Truitt.

In 2019, the MidAtlantic Farm Credit distributed over $40 million in cash to its member-borrowers. To learn more about Farm Credit’s patronage program, please visit mafc.com/about/patronage.

About MidAtlantic Farm Credit

MidAtlantic Farm Credit is an agricultural lending cooperative owned by its member‐borrowers. It provides farm loans for land, equipment, livestock and production; crop insurance; and rural home mortgages. The co-op has over approximately 11,700 members and over $2.8 billion in loans outstanding. MidAtlantic has branches serving Delaware, Maryland, Pennsylvania, Virginia and West Virginia. It is part of the national Farm Credit System, a network of financial cooperatives established in 1916 to provide a dependable source of credit to farmers and rural America.

Share article on social media or email:

AHN, Peoples Natural Gas Announce Plans for Innovative Green Energy Solution to Power New Wexford Hospital


As we prepare to open a world-class hospital in Pine Township, we are extremely pleased to partner with Peoples Natural Gas to power the facility with an environmentally responsible energy solution that will greatly benefit the region and its many residents.

Residents in Pine Township and the surrounding areas will have convenient access to a wide range of clinical services when AHN Wexford Hospital opens next year. Allegheny Health Network (AHN) and Peoples Natural Gas (PNG) officials announced today that the hospital will also be powered by an onsite, state-of-the-art and environmentally friendly energy solution.

Construction of a natural gas-fired electric power generation, heating and cooling facility is currently underway on the future Wexford Hospital’s campus. A combined heat and power (CHP) system within the 18,000 square-foot, two-story power plant facility will simultaneously produce up to two megawatts of electricity and thermal energy onsite to meet all of the facility’s energy needs including electricity, heat, chilled water, hot water and steam.

“At AHN, we strive to be good corporate citizens in every endeavor we take to invest in our facilities and expand access to care in the communities we serve,” said Allan Klapper, MD, president, Wexford Hospital. “As we prepare to open a world-class hospital in Pine Township, we are extremely pleased to partner with Peoples Natural Gas to power the facility with an environmentally responsible energy solution that will greatly benefit the region and its many residents.”

The Wexford Hospital power plant project has been supported by a $1.8 million grant from the Pennsylvania Department of Community and Economic Development and the Department of Environmental Protection as part of the Alternative and Clean Energy (ACE) program. The program provides financial assistance for utilization, development and construction of alternative and clean energy projects in the commonwealth.

According to PNG, the combined heat and power system offers a number of benefits compared to conventional electricity and thermal energy production, including increased efficiency achieved from the onsite generation which eliminates wasted energy during typical transmission and distribution. The system also reduces emissions of greenhouses gases and air pollutants.

In the event of a grid disruption, the system will provide a redundant source of power to the hospital, supporting continuous operations and maximizing patient safety.

“Peoples is proud to partner with AHN to help bring this amazing new hospital to life in an environmentally friendly way for the residents of Wexford and the surrounding region,” said Morgan O’Brien, president and CEO, Peoples Natural Gas. “Innovation is at the heart of many new developments currently underway in or planned for our region, and AHN’s Wexford Hospital is a great example of that vision and commitment to its future.”

Construction of the plant is expected to be complete by the end of this year, meeting all of the hospital’s energy needs as construction of the hospital proceeds towards its expected completion in 2021.

AHN Wexford Hospital will offer comprehensive women and infant care, including labor and delivery services; advanced cardiac, neurosurgical, orthopaedic, and cancer care; a 24-room emergency department and short-stay observation unit; an adult intensive care unit (ICU); operating rooms that provide minimally-invasive robotic surgical capabilities; 160 all-private inpatient rooms; and a host of other patient- and family-friendly clinical programs, amenities and services.

“The Township of Pine is excited that AHN and Highmark Health have made a significant investment in transforming health care in this region and is doing so in a way that also prioritizes the health and wellbeing of the environment,” said Larry Kurpakus, Director of Code Administration and Land Development, Township of Pine.

About Allegheny Health Network

Allegheny Health Network (http://www.AHN.org), a Highmark Health company, is an integrated healthcare delivery system serving the greater Western Pennsylvania region. Among the network’s 250 clinical locations are nine hospitals — Allegheny General Hospital, its flagship academic medical center in Pittsburgh; Allegheny Valley Hospital in Natrona Heights, Pa.; Canonsburg Hospital in Canonsburg, Pa.; Forbes Hospital in Monroeville, Pa.; Grove City Hospital, Grove City, PA; Jefferson Hospital in Jefferson Hills, Pa.; Saint Vincent Hospital in Erie, Pa.; West Penn Hospital in Pittsburgh; and Westfield Memorial Hospital in Westfield, NY. AHN also is home to a comprehensive research institute; Health + Wellness Pavilions; home- and community-based health services; and a group purchasing organization. The network employs 21,000 people and has more than 2,500 doctors on its medical staff. Established in 2013, AHN’s member hospitals share legacies of charitable care that date back more than 160 years.

About Peoples Natural Gas

Peoples is an energy provider serving approximately 740,000 homes and businesses in Western Pennsylvania, West Virginia and Kentucky. The company’s mission is to improve the lives of its customers and to help build long-term economic growth for the regions it serves. For more information about Peoples, visit http://www.peoples-gas.com and follow Peoples on social media @peoplesnatgas.

Share article on social media or email:

Patricia A. Shirley’s newly released “Memories from a Federal Working Girl” is a closer look into the author’s own wonderful federal journey


News Image

“Memories from a Federal Working Girl”: a promising woman’s federal journal and a magnified look into her triumphs and failures. “Memories from a Federal Working Girl” is the creation of published author Patricia A. Shirley, a writer who spent forty years in federal service. She worked as a file clerk in the US Food and Drug Administration, and later worked for the Department of Defense. Her final position was with the Administrative Office of the US Courts before she retired in 2008.

Shirley writes, “Patricia always wanted to work for the federal government. After a visit to the White House when she was nine years old, she was ‘hooked.’ Patricia grew up in rural Orange, Virginia, where her family owned a small farm. There, with her parents, Willis and Helen Shirley, three brothers, three sisters, and Grand and Pappy, her paternal grandparents, she was told if she worked hard she would succeed. That there was ‘no one out there better than she,’ but to always remember she was no better than anyone else. She began her federal career as a file clerk working for the US Food and Drug Administration. After a year, she accepted a position with the US Navy where she worked as a draftsman and report preparer. Continuing her federal journal, she accepted a position with the US Air Force where she worked as the division secretary for the chief of the division. Seeking an increase in pay and more responsibility, she accepted a position with the Office of Secretary of Defense as a legislative assistant, interacting with congress members and their staffs. After a short period, she was offered a position in the international and intelligence law division, interacting with our intelligence agencies: CIA, DIA, and National Security Agency. Patricia continued to progress in her career accepting a position with defense research and engineering, first working with and interacting with our NATO allies and then with the Defense Science Board where she became executive assistant to the director. After the 9-11 terrorist attacks, Patricia accepted a position with the administrative office of US Courts as an administrative analyst planning training sessions for judges’ secretaries. Patricia ended her federal career in 2008 after forty years of serving our government.”

Published by Christian Faith Publishing, Patricia A. Shirley’s new book is an inspiring read of a courageous woman who had always wanted to establish a career in the federal government—and so, she did.

This manuscript holds the author’s federal journal as she traces back her career in the government of 40 years in service.

View a synopsis of “Memories from a Federal Working Girl” on YouTube.

Consumers can purchase “Memories from a Federal Working Girl” at traditional brick & mortar bookstores, or online at Amazon.com, Apple iTunes store, or Barnes and Noble.

For additional information or inquiries about “Memories from a Federal Working Girl,” contact the Christian Faith Publishing media department at 866-554-0919.

Share article on social media or email:

Registration Open for The Case Management Society of America’s 30th Annual Conference & Expo


This year’s conference is a great opportunity to learn and grow as a professional case manager. It also is a time to celebrate our accomplishments!” Jose Alejandro, CMSA President.

Registration is now open for the 30th Annual Case Management Society of America (CMSA) Conference & Expo, taking place in the beautiful city of Boston, MA. From June 28- July 2, 2020, case managers from across the globe will gather to celebrate “30 years of Care Transitions Across the Full Continuum,” while experiencing and educational and networking event designed exclusively for them.

For 30 years the CMSA conference has provided educational content that not only helps case managers with new strategies and solutions, but also provides tools to help them to grow and succeed in their careers. This year’s concurrent sessions, poster presentations and symposia will give attendees the opportunity to learn and share best practices. With eight key practice setting tracks including acute care, workers’ comp, discipline specific case management, long term care services, leadership, legal/regulatory, population health and managed care, sessions will explore ways to make an impact while improving outcomes across the entire continuum.

“It is only fitting that we have our 30th Annual CMSA Conference & Expo in Boston. In 1773, the Boston Team Party demonstrated the power of political advocacy and the voice of the people. CMSA has a long history of advocating for at-risk and vulnerable populations. This year’s conference is a great opportunity to learn and grow as a professional case manager. It also is a time to celebrate our accomplishments!” remarked Jose Alejandro, CMSA President.

This year there will be 8 pre-conference sessions, including new areas of focus such as hospice/palliative care, mentoring and leadership. In addition, CMSA is cognizant of the health and well-being of case managers; during conference week, the conference offers a pre-conference session focused on stretching and daily morning yoga classes with a registered teacher. Four unique post conference sessions round out an exciting week, including the 2020 CMAG launch, animal therapy and the ever-popular public policy forum. Also returning this year is the Military/DoD/VA Day, a special daylong event including keynotes, sessions and other exclusive events.

The 2020 event expects to welcome over 2,500 healthcare professionals to the conference. Over 250 companies will welcome attendees at CMSA’s 2020 Expo, providing information and demonstrations regarding the most current products and services. Attendees will accrue new resources and connections to enable recommendations and implementation of the latest technologies when they return to their practices. Again this year in the exhibit hall, CMSA will present the “Passport to Prizes,” which gives the attendees the opportunity to win two large trip giveaways.

Alton White will kick off the week-long celebration as the opening keynote. Captivating audiences everywhere, this triple talented singer, actor and dancer has starred in six smash Broadway hits and is most known as his role in “The Lion King” as King Mufasa. Sarita Maybin, main session keynote, is an international speaker, communication expert, and author will teach the audience how to stay positive and confront tough communication situations while having fun. Closing out the week is Mark Kemp, aka Marvelless Mark. An international speaker, author and entertainment guru will entertain while providing new strategies, tactics and tools for creating immediate rock star results.

CMSA executive director, Kathleen Fraser, remarked “Every summer our conference offers case managers a mid-year check-in on their careers – an opportunity to connect with colleagues, access timely clinical updates and be exposed to new resources. On our 30th anniversary, we’ll celebrate how far case management has come and look to the future to see what’s possible to achieve, together.”

CMSA continues to forge the future for this rapidly expanding healthcare profession. Through educational content, resources, exhibits, technology, public policy and peer-to-peer networking, attendees can create a custom experience that meets their specialized professional needs.

Early bird pricing is available until April 1st, and all full conference registrants receive a complementary 1-year membership to CMSA. * Learn more and register for CMSA’s 29th Annual Conference and Expo at cmsa.org/conference.

About the Case Management Society of America (CMSA)

Established in 1990, the Case Management Society of America is the leading non-profit association dedicated to the support and development of the profession of case management. CMSA serves more than 30,000 members, subscribers and participants, and 85 chapters worldwide, through educational forums, networking opportunities, legislative advocacy and established standards to advance the profession. For more information, visit https://www.cmsa.org or follow CMSA on Twitter @CMSANational.

*terms apply, please visit conference.cmsa.org for more information and restrictions

Share article on social media or email:

Oxford Performance Materials’ OsteoFab® 3D Printed PEKK Technology Focus of Study Published in The Spine Journal


PEKK implants demonstrated bone ingrowth, no radiographic interference, no fibrotic tissue membrane formation, significant increase in bony apposition over time, and significantly higher push-out strength compared to standard PEEK.

Oxford Performance Materials, Inc. (OPM), an industry leader in advanced materials science and high-performance additive manufacturing (HPAM®), announced today the publication of “A Comparative Study of Three Biomaterials in an Ovine Defect Model: A TETRAfuse® PEKK Study” in The Spine Journal.1,2,3 This study examined the in vivo material characteristics of polyetheretherketone (PEEK), titanium-coated PEEK, and 3D printed polyetherketoneketone (PEKK) in a sheep model. In comparison with PEEK, the PEKK implants displayed bone ingrowth, no fibrotic tissue formation, a significant increase in bony apposition over time, and a significantly higher push-out strength.

Conventionally, PEEK and Ti-coated PEEK have been used as standard biomaterials for implants like spinal interbody cages, but recent shortcomings in these materials have led to adoption of newer, more innovative technologies. Although PEEK shows an elastic modulus comparable to that of cortical bone, literature has illustrated that it consistently prompts a fibrotic and inflammatory tissue response, preventing it from integrating with host tissue. And while titanium exhibits similar osseointegrative properties when compared to PEKK, it is substantially stiffer than cortical bone and it is radiopaque, which makes bone fusion assessments difficult as the bone/implant interface is often obscured in post-operative imaging. With titanium coated PEEK implants, these drawbacks still exist but with the added risks of delamination of the titanium coating, subsidence, and the generation of wear debris.

“The results reported by The Spine Journal were gratifying and support the comparative benefits of 3D printed PEKK implants that we have been hearing from surgeons for some time, now,” said Scott DeFelice, CEO. “OPM’s OsteoFab® technology platform is increasingly recognized as a ‘best of’ solution for CMF and spinal implants, and we will be launching our unique 3D printed suture anchor product in the coming weeks.”

3D printed PEKK delivers high mechanical integrity, radiographic visibility, and osseointegration, as well as inherent antibacterial characteristics.4 In this Spine Journal study, PEKK demonstrated a significantly higher push-out force when compared to PEEK at 8 and 16 weeks post-implantation and also had notably greater bone attachment following pushout when compared to PEEK and Ti-coated PEEK. From a histological standpoint, 3D printed PEKK also showed substantial bone growth. Within a 2mm radius of the implant, 3D printed PEKK exhibited the highest bone ongrowth percentage when compared to PEEK and Ti-coated PEEK at both the 8- and 16-week endpoints.

By directly comparing the three implant materials in an in vivo model, the study showed clear evidence of the performance characteristics at the bone-implant interface. In this instance, 3D printed PEKK presented a high propensity for bone-ingrowth, no radiographic interference, and a material structure that allowed for an increase of integration of cancellous bone into the implant. In a clinical scenario, 3D printed PEKK implants could improve the effectiveness of spinal fusion procedures by promoting osseointegration and decreasing the chance of complications associated with PEEK and Ti-coated PEEK.

Since 2013, OPM has been manufacturing patient-specific cranial and facial implant devices that have been distributed world-wide. In addition to over 2,300 craniomaxillofacial implants, OPM has 3D printed over 70,000 OsteoFab® implants under a number of 510(k) clearances and just recently entered the sports medicine arena with a soft tissue fixation device. As the pendulum shifts away from traditional material solutions, OsteoFab® 3D printed PEKK is proving to be a robust alternative with a rapidly growing user base.

About Oxford Performance Materials, Inc.

Oxford Performance Materials was founded in 2000 to exploit and commercialize the world’s highest performing thermoplastic, PEKK (poly-ether-ketone-ketone). OPM’s Materials business has developed a range of proprietary, patented technologies for the synthesis and modification of a range of PAEK polymers that are sold under its OXPEKK® brand for biomedical and industrial applications. The Company is a pioneer in 3D printing. OPM Biomedical’s OsteoFab® technology is in commercial production in numerous orthopedic implant applications, including cranial, facial, spinal, and sports medicine devices. OPM is the first and only company to receive FDA 510(k) clearance to manufacture 3D printed patient-specific polymeric implants and has six 510(k) clearances in its portfolio. OPM Industrial produces 3D printed OXFAB® production parts for highly demanding applications in the energy, transportation and semiconductor markets. OXFAB® structures offer significant weight, cost, and time-to-market reductions that are defined in a set of specified performance attributes in the exhaustive OPM B-Basis database, developed in conjunction with NASA. For more information, please visit: http://www.oxfordpm.com

Company Contact:

Willow Johndrow

Director of Marketing

860.656.9442

References

1. Cheng, PhD B, Jaffee S, Swink I, Averick, PhD S, Horvath S, Zhukauskas, PhD R et al. A Comparative Study of Three Biomaterials in an Ovine Bone Defect Model: A TETRAfuse® PEKK Study. The Spine Journal. 2019. doi: 10.1016/j.spinee.2019.10.003

2. RESULTS paragraph from the Study abstract reads: “PEKK implants demonstrated bone ingrowth, no radiographic interference, no fibrotic tissue membrane formation, significant increase in bony apposition over time, and significantly higher push-out strength compared to standard PEEK. The PEKK implant displayed bone growth characteristics comparable to Ti-coated PEEK with significant improvements in implant integrity and radiographic properties.”

3. Note: TETRAfuse® is a Registered Trademark of RTI Surgical, Inc. and the tradename for RTI’s spinal implants that are additively manufactured by Oxford Performance Materials, Inc. using OPM’s proprietary OsteoFab® technology platform. TETRAfuse® was awarded a 2019 MedTech Breakthrough Award for “Best New Technology Solution – Orthopedics” and a 2018 Spine Technology Award from Orthopedics This Week.

4. Wang M, Bhardwaj B, Webster T; Antibacterial properties of PEKK for orthopedic applications. Int’l Journal of Nanomedicine. 2017: 12 6471-6476.

Share article on social media or email: